sE Electronics T2 Multi-pattern Large-diaphragm Condenser Microphone – Matched Pair
4,795.00 Excl. VAT
- Multi-pattern Large-diaphragm Condenser Microphone
- Hand-crafted titanium-sputtered true condenser capsule
- Accurate definition and fast transient response
- Switchable pickup patterns, cardioid, omnidirectional, figure-eight, and hypercardioid
- Innovative close-miking shockmount
- 40 / 80 Hz bass-cut filters and -10 / -20 dB pads
- Available in a matched-pair configuration
Available on backorder
HAND-CRAFTED 1″ TITANIUM-SPUTTERED TRUE CONDENSER CAPSULE
The T2’s titanium-sputtered capsule is much stiffer and three times lighter than gold, giving it a quicker transient response than gold-sputtered capsules, which is essential when recording instruments that have fast attack – like drums and percussion – to maintain clarity and deliver exceptionally accurate performance.
FREE OF THRILLS, NO LEDs. NO PLASTIC SWITCHES.
Select between 4 polar patterns with metal switches, from cardioid to omnidirectional or figure-eight to hypercardioid, with a gold-sputtered, dual-diaphragm capsule for precision-based miking techniques to minimize signal bleed from unwanted sources in demanding studio or fast-paced live environments.
DENT-PROOF METAL HOUSING & PREMIUM FINISH
Hand-crafted with the highest attention to detail, built with a roadworthy die-cast all-metal housing, metal switches, and rugged spring steel wire mesh grille, the T2 is built to last for years of demanding studio use and the day-to-day life of a touring artist.
SWITCHABLE PRE ATTENUATION PAD & BASS-CUT FILTER
Select between two pre-attenuation pads for an extended dynamic range and compensate for loud vocals, guitars, drums, and brass instruments. With two low-cut filters, easily tame excessive low-frequency rumble and proximity effect and efficiently adjust for close-miking techniques.
AVAILABLE AS A MATCHED STEREO-PAIR
Each T2 Matched-Pair is rigorously tested, tuned in-house and sonically matched to ensure a virtually identical frequency response for balanced, consistent sound. Complete with a metal mic case, stereo bar, two shockmounts and two T2 microphones.
TUNED & SONICALLY MATCHED IN-HOUSE
Each T2 Matched-Pair is rigorously tested, tuned in-house and sonically matched to ensure a virtually identical frequency response for balanced, consistent sound. Complete with a metal mic case, stereo bar, two shockmounts and two T2 microphones.
CUSTOM SHOCKMOUNT + CHASSIS
The flat, round-edged chassis design and custom suspension mount allow the mic to be centered within the shock, used flat against a drum head or guitar cab, among many other use cases, and provides exceptional protection from low-end rumble and footfall noise.
| Weight | 3.46 kg |
|---|---|
| Dimensions | 34.19 × 27.51 × 14.50 cm |
| Color: | Silver |
| Connector: | XLR |
| Diaphragm Size: | 1″ (25.4mm) |
| Frequency Range: | 20Hz-20kHz |
| Included Accessories: | Shockmount, Hardshell Case, Thread Adapter |
| Low Cut Filter: | 40 / 80Hz (-6dB/octave), switchable |
| Max SPL: | 137 dB SPL (0.5% THD @ 1kHz) |
| Output Impedance: | 22 ohms |
| Pads: | -10dB, -20dB |
| Polar Pattern: | Cardioid, Hypercardioid, Omni-directional, Figure-8 |
| Power Source: | 48V phantom power |
| Self Noise: | 13dB A weighted |
| Microphone Type | Condenser |
